永利国际手机登录-首页

新闻资讯 /News Center

  • 永利国际手机登录温度检测仪表的安装规定
  • 本站编辑:杭州特力声科技有限公司发布日期:2019-11-27 21:54 浏览次数:

1、接触式温度检测仪表(水银温度计、双金属温度计、压力式温度什、热电阻、热电偶等)的测温元件应安装在能准确反映被测对象温度的地方。

2、在多粉尘的部位安装测温元件,应采取防止磨损的保护措施。

3、测温元件安装在易受被测物料强烈冲击的位置,以及当水平安装时其插入深度大于1M或被测温度大于700°C时,应采取防弯曲措施。

4、表面温度计的感温面应与被测对象表面紧密接触,固定牢固。

5、压力式温度计的温包必须全部浸入被测对象中,毛细管的敷设应有保护措施,其弯曲半径不应小于50MM,周围温度变化剧烈时应采取隔热措施。 

201611071332404186.jpg

1. The temperature measuring element of the contact temperature measuring instrument (mercury thermometer, bimetal thermometer, pressure temperature, thermal resistance, thermocouple, etc.) shall be installed in a place that can accurately reflect the temperature of the measured object.

2. When installing temperature measuring components in dust-prone areas, protective measures against wear shall be taken.

3. The temperature measuring element shall be installed in a position vulnerable to strong impact of the material under test, and anti-bending measures shall be taken when the insertion depth is more than 1M or the measured temperature is more than 700°C during horizontal installation.

4. The temperature sensitive surface of the surface thermometer should be in close contact with the surface of the object to be measured and fixed firmly.

5. The temperature package of pressure thermometer must be immersed into the object under test, and the capillary should be laid with protective measures. Its bending radius should not be less than 50MM.

销售一部:0571-88052635
在线咨询(刘先生)

销售二部:0571-86058040
在线咨询(马小姐)

销售三部:0571-88051722
在线咨询(华先生)

销售四部:0571-89874215
在线咨询(谢先生 )